FAQS

You can open a support ticket for any request by clicking on the following link:

https://www.clementoni.com/en/form/

You can visit the website https://clementoni.zendesk.com/hc/en-us and write the name or code of the game or open a support ticket using this link https://www.clementoni.com/en/form/ and ask for the user's manual

Carefully and attentively remove the wheel pins from the main mold, ensuring that there are no plastic residues on the surface or the edges of the component.

 It is essential to carefully remove the plastic residues to ensure that the wheels can move smoothly.

Adult supervision is recommended for this task.

For an accurate cleaning of the wheel pin, it is advised to use appropriate tools that are easy to find, such as a file.

We suggest you consult the following video for correct assembly of AIRO:

Videotutorial

In case the wheels still do not move smoothly, it is recommended to open a ticket by clicking on this link.

Make sure that the batteries are charged and that the procedure for setting the commands has been properly followed.If you continue to have problems, you can open a support ticket by clicking on the following link:https://www.clementoni.com/en/form/ and specifying the issue you have run into.

Check the indications on the back of the boxes where you will find the hardware/software requirements

We recommend replacing the batteries with a new set and checking to make sure that the Molex-connector pins have been properly inserted.If you continue to experience problems, you will have to open a support ticket via the following link:https://www.clementoni.com/en/form/ and specifying the issue you have run into.

If possible, use rechargeable batteries, but follow the instructions to recharge them properly. Rechargeable batteries must be properly recharged by using a special charger.

Check to make sure that the batteries in the Mind Designer are new. Bluetooth pairing must only be carried out via the Mind Designer app. In order to optimise the pairing process, please enable Geolocation services (Android) or Location Services (iOS).

Should the wheels of the Cyber Talk Robot fail to move properly, please click on this link and carefully watch the video.If the problem continues, we suggest switching the device off, taking out the batteries and disconnecting the Molex pins from the motherboard.Allow the cables to stand disconnected for two minutes.Reconnect the cables, put the batteries back in and programme the Cyber Robot again to see whether it works properly.If you have any other requests, please send us an email to:https://www.clementoni.com/en/form/

Single components are not available for separate sale.If you have enquiries, you can open a support ticket via the following link https://www.clementoni.com/en/form/

We are sorry but the themes and jigsaw pieces are only available in the sizes shown in the catalogue.

No, you must send the postcard through the mail system: the original barcode must be stuck onto the postcard and sent to the address of Clementoni's headquarters (printed on the postcard itself or on the box).

Once the postcard has been sent, no costs are to be borne by the customer.

For jigsaw puzzles purchased over 5 years ago, please get in touch with the customer-support office for information about availability.

You can download the postcard for the jigsaw-puzzle support department by clicking here: https://www.clementoni.com/static/docs/cartolina.pdf

Use our CLEMENTONI JIGSAW GLUE and follow these simple steps:
1. Place the jigsaw on a surface with the upper side (printed side) facing upwards.
2. Start by putting a small amount of glue in the middle and then spread it out towards the corners.
3. Keep on adding more glue as you need it, making sure that you apply it evenly over the surface.

It is very difficult to know how much glue is needed to glue together a jigsaw puzzle. Everything depends on how many layers you want to apply and what you intend to do with the jigsaw.

One thing we can say is that if you apply a thin layer of glue (generally a sufficient amount to keep the pieces together), one bottle of our Clementoni Puzzle Glue should be enough for 4 x 1,000-piece jigsaw puzzles.

The jigsaw puzzles in the list below can be glued on the printed upper surface without any risk of damaging the finish:
- Brilliant jigsaw puzzles
- Glitter jigsaw puzzles
- Fluorescent jigsaw puzzles
- Blackboard jigsaw puzzles
- 3D jigsaw puzzles

Please bear in mind that the estimated delivery time is between 6-8 weeks due to the high number of requests.

Should a jigsaw theme no longer figure in our catalogue or no longer be in stock, you will receive an email asking you to choose a jigsaw of the same type and size.

There is no need to tell us which pieces are missing because Clementoni will send you a bag containing the whole jigsaw puzzle.

On average, the time required to deal with your request varies between 6 to 8 weeks.

As there is an increasing number of requests and material availability fluctuates, you may have to wait longer for us to handle your request. Please accept our apologies for any inconvenience. Rest assured that we are doing our utmost to provide customers with the support they need.

Unfortunately, for technical reasons, we cannot replace single missing pieces. However, our production processes are constantly improving and we strive to ensure the highest quality standards every single day. The use of automated-control systems means that it is highly unlikely that pieces will be missing from our jigsaw puzzles.

If you think that a piece is missing from your jigsaw puzzle, please write to our Customer-Support service, fill in the postcard inside the jigsaw itself, or complete the online form. We will deal with your request as quickly as we can.

The Customer-Support office will send you a complete new jigsaw puzzle; this service is available for jigsaw sizes varying from 500 pieces right up to the masterpiece with 13,200 pieces.

No, for technical reasons, the number of pieces in the jigsaw puzzle may differ slightly from the number of pieces printed on the box.

Here is a list of the difference between the pieces indicated and the actual ones:1

000 >1008
1000 Panorama > 990 Panorama
1500 > 1504
2000 > 1998
3000 > 3008
6000 > 6016
13200 > 13224

Naturally, you will be able to find suitably-sized frames for the jigsaw puzzles with between 500 and 1,500 pieces in any major retail store, otherwise you can buy a made-to-measure frame.

PLEASE NOTE: for technical reasons, there may be a difference of a few millimetres between the dimensions printed on the box and those of the actual finished jigsaw. Therefore, we suggest finishing the jigsaw puzzle first and measuring it before choosing your frame.

The jigsaws with 13,200 pieces are packed into 6 bags.

In case the Legendary Creatures app is not available in the Google Play Store, click here to download the installation file.

Once downloaded, transfer the file inside your device and install the Legendary Creatures app by clicking on the apk file.